-
FSL-V Deluxe : Slitters Rewinders
FSL-V Slitter Rewinder is specially designed for the plastic films which are of variable thicknesses, low tension demand or tension strictness. It is also suit for slitting a wide variety of materials such as, cellophane, PET, OPP, CPP, PE, PVC, paper roll, and printed films.
◇Feature:- Equipped with shaftless & pneumatic-chuck unwind stand.
- Auto un. tension control.
- Two servomotor drive system providing the most accurate winding control.
- Adopted duo slitting system on the V series slitter rewinder.
- Rewinding Individual lay-on roller 4 sets.
- Laser core positioning system. (optional)
- Products discharge device.
- Inner pressure type differential rewinding shafts.
- Micro computer controller
- LCD colorful touch screen and simple figure display for setting.
- Dialogue parameter setting environment for fast start.
- Rewind tension auto increase function.
- Unwind auto stop and material brake stop function.
- Parameters memory function: included material thickness, initial diameter,tension and so on.
-
FSL-T Superior : Paper Slitter Rewinder
The T Series Slitter Rewinder is designed for slitting all types of flexible packaging films, photonics and optical materials. Such as cellophane, PET, OPP, CPP, PE, PVC, paper rolls, counterfeit-proof labels. The HCI FSL-T Series is a universal Slitter Rewinder on the market.
◇Feature:
1.SHAFTLESS & PNEUMATIC-CHUCK UNWIND STAND- The left and right unwind arms are dived by motor; the operator can adjust the width freely.
- Equipped with pressure chuck for clamp the parent roll quick and easy.
- Unwind control panel.
- Single operator is required to manipulate and load the parent roll.
- Whole unwind stand can move horizontally, left and right each 50 mm. It can ensure the accuracy of slitting position.
- The guiding operates in two modes: Web edge & Printing line guiding
- Three individual motors: One motor drives upper rewind shaft, one drives lower rewind shaft and the third motor is connected to the main drive roller.
- The unwind tension is sensed by load cell and compared to setting value. The PLC will increase or decrease it according to the calculating difference automatically. It can maintain the stable tension output during whole slitter operation.
- Tension isolation point through pneumatic nip rubber roller, giving perfect isolation between the unwind and rewind. It also ensures no slippage or scratches when Slitter running.
- Razor in groove roller & Shear knifes.
- Equipped with shaft tracks, ease for installation.
- Equipped with protecting cover, prevent personal injured.
- All FSL-T Slitter are equipped with vacuum type trim disposal. Specially designed ejectors with powerful ventilators remove the slit edge of web.
- Anti statics brushes discharge electrostatic charge when plastic material is being slit and rewound. There are two sets of anti statics brushes, one prior to upper rewind shaft, the other prior to lower rewind shaft.
- Automatic calculation control for rewinding tension employs HCI's self-developed precision friction rewinding ring, combined with automatic side-pressure compensation. Two independent rewinding motors and an intelligent rewinding diameter control system assure extremely stable rewinding tension without the need to adjust it when speed and diameter varied.
- Equipped with 4 sets of independent lay-on roller. It can adjust the position and width according to the actual slit rolls. It guarantees full contact between lay-on roller and slit roll. To built the good slit roll structure.
- Equipped with products discharge device: helps heavy rolls unloading as well as efficiency during slit roll exchange.
- Upgrade to Servo motors driven is available for FSL-T Slitter.
- LCD colorful touch screen.
- Dialogue parameter setting environment.
- Parameters memory function.
- Tension computes function.
- Unwind auto stop and break stop function.
- Meter reached auto stop function.
- Upper and lower rewind shaft different winding direction function.
- Rewind tension auto increase function.
-
FSL-KA Practical : Slitter Rewinder Machines
HCI Newly develop Slitter Rewinder, the FSL-KA Series Slitter Rewinder is designed for slitting a wide variety of materials such as, cellophane, PET, OPP, CPP, PE, PVC, paper rolls, and printed materials.
◇Feature:
1.The Integral Structure of FSL-KA Slitter Rewinder- This compact design occupies minimal floor space. Unwind and rewind is designed in same side providing the most convenient operation.
- Enlarge the roll capacity: unwind diameter can reach to 800mm; rewind diameter can reach to 500mm. Reducing the loading frequency and expanding the applied ranges.
- The left and right unwind arms are driven by motors and liner guideway, each arm can move individually. Especially for the parent roll which is uneven seriously.(New structure only on FSL-KA Slitter Rewinder)
- Equipped with pneumatic chuck for clamp the parent roll efficiently and easy.
- Quick change for different size of chucks.
- Equipped with web adjustment roller. It can reduce the winkle that cause by the low parent roll quality.
- Whole unwind stand can move horizontally, left and right each 70 mm. It can ensure the accuracy of slitting position. The guiding system operates in two modes:
a. Web edge guiding
b. Printing line guiding
- Three individual motors: One motor drives upper rewind shaft, one drives lower rewind shaft and the third motor is connected to the main drive roller.
- The operator can set the tension and material thickness for each rewind shaft separately.
- The winding direction of rewind shaft can be change in any time and upper and lower shaft can run different direction also.
- The unwind tension is sensed by load cell and compared to the set tension. The microcomputer control system will increases or decreases tension according to the calculated the tension difference automatically. It can maintain the stable tension output during whole operation.
- Tension isolation point through pneumatic nip rubber roller, giving perfect tension isolation between unwind and rewind. It also ensures no slippage or scratches.
- Shear knives and razor blades are able to work independently or simultaneously. Due to compact machine design the change of slitting method is easily achieved.
- Segmented groove roller can insert to the lower knife shaft directly. It is possible to change groove roller without removal any shaft.
- Upper knife shaft tracks designed for quick install of male knives.
- Lower knives shaft is equipped by cantilevered joint. It reduces the job exchange time greatly. The arrangement for aluminum spacers and female knives can be done without take the lower shaft out.(New Design Only on KA Series Slitter Rewinder)
- Equipped with protecting cover for slitting section, prevent personal injured.
- Equipped with trim reject fan. Specially designed ejectors with powerful ventilators remove the slit edge of web.
- It discharges electrostatic charge while plastic film is being slit and rewound.
- A manual laser adjustment system enables the operator to reload new cores quickly and accurately minimizing the setup time. The laser indicates the core position on the rewind shafts allow precise positioning of cores. (Optional Accessories for KA1300 Slitter Rewinder)
- Automatic calculation control for rewinding employs HCI's self-developed precision friction rewinding ring, combined with automatic side-pressure tension compensation. Two independent rewinding motors. Rewinding tension is controlled by a fully-automatic air control system. An intelligent rewinding diameter control system assures extremely stable rewinding tension without the need to adjust the tension according to speed and diameter variables. Set the setting tension according to the initial condition, and then the entire tension - from initiation to finalization - is automatically controlled by memory and feedback.
- Adopted with 2 sets of pneumatic lay-on rollers for build the good slit roll structure.
- Equipped with products discharge device: helps heavy rolls unloading as well as efficiency during slit roll exchange.
- Adopted with industrial micro computer providing the accurate and stable control.
- LCD colorful touch screen and simple figure display for setting.
- Dialogue parameter setting environment for fast start.
- Tension control auto/manual function.
- Adopted with two rewind tension control programs: Rewind Torque mode & Rewind Speed mode.
- Rewind tension auto increase function.
- Upper and lower rewind shaft different winding direction function.
- Tension simulate function.
- Unwind auto stop and material brake stop function.
- Parameters memory function: included material thickness, initial diameter, tension and so on.
-
FSL-K Standard : Rewinder Slitter
For all types of slitting on such materials as Cellophane, PET, CPP, OPP, PE, PS, PVC, etc., paper film-both plain and printed. For slitting counterfeit-proof labels on computers, electronics, computer and optical materials, film roll and foil roll.
◇Feature:
1.The best selling model from 1992 to 2008
2.A mature model with all the standardized parts.
3.Flexible specifications are available with a variety of optional accessories.
4.This compact design occupies minimal floor space.
5.Extensive safety guards.
6.Unwinding Section- Unwind and rewind is designed in same side providing the most convenient operation.
- The transmission mechanism is specially designed to ensure stable operation and perfect edge smoothness.
- Lift-up & floating type unwind stand with 3" air shaft. Single operator is required to manipulate and load the parent roll.
- Equipped with web adjustment roller. It can reduce the winkle that cause by the low parent roll quality.
7.Slitting Section
- Duo cutting system: razor cutting in the air and shear knives.
- Equipped with statics eliminator, it discharges electrostatic charge while plastic film is being slit and rewound.
- Equipped with trim reject fan and left/right moving type trim winder. Trim winder is designed on machine side saved floor space and the winding tension is adjustable.
- Cantilevered rewinding shaft for easy operation. (Swing out type)
- The rewinding mechanism is designed incorporating HCI friction quick lock rings to overcome the problems of material thickness variation.
- Rewinding Lay-on roller *4 sets.
- Equipped with meter counter which can stop the machine automatically when preset length reached.
- Web guiding system (printing line & edge)
- Hydraulic ascent / descent unwind stand: unwind dia.1,000mm, rewind dia. 600mm
- Unwind tension auto controller with load cell sensor.
- Rewind tension auto controller.
- Razor cutting in groove roller method.
- Vacuum type trim disposal system.
-
FSL-J Narrow Width : Paper Slitter Rewinder
For all kinds of high grade thin paper, cellophane, plastic film, and aluminum foil. Especially suitable for positive, and negative foils of condenser and electrolyze paper. For slitting electronics, computer and optical materials, film roll and foil roll.
◇Feature:
1.Unwinding Section- This compact design occupies minimal floor space.
- Swing out & fixed type unwind stand with 3" air shaft. Single operator is required to manipulate and load the parent roll.
- The rollers are tightly arranged to decrease tolerance of cross and longitudinal winding of material.
- Shear knives cutting method.
- The speed can be easily varied to accommodate tension difference caused by the changing diameter of the winding material.
- The winding and feeding motions are driven by a universal satellite gear transmission.
- Equipped with meter counter which can stop the machine automatically when preset length reached.
- Unwind tension auto controller with load cell sensor.
- Rewind tension auto controller.
- Vacuum type trim disposal system.
- Special size of rewind shaft.
-
FSL Economical : Rewind Slitter
For all types of slitting on materials such as, Cellophane, PET, CPP, OPP, PE, PS, PVC, paper film-both plain and printed, and etc.. For slitting counterfeit-proof labels on computers, electronics, computer and optical materials, film roll, and foil roll.
◇Feature:
1.Unwinding Section- Unwind and rewind is designed in same side providing the most convenient operation.
- Swing out & floating type stand with 3" air shaft. Single operator is required to manipulate and load the parent roll.
- Equipped with web adjustment roller. It can reduce the winkle that cause by the low parent roll quality.
- Duo cutting system: razor cutting in the air and shear knives.
- Equipped with statics eliminator, it discharges electrostatic charge while plastic film is being slit and rewound.
- Equipped with trim reject fan and trim winding shaft*2.
- Cantilevered shaft (Swing out type) for easy operation.
- The rewinding mechanism is designed incorporating HCI friction bakelite rings to overcome the problems of material thickness variation.
- Lay-on roller *4 sets.
- Equipped with meter counter which can stop the machine automatically when preset length reached.
- Web guiding system. (printing line & edge)
- Dia. 1000mm unwind stand.
- Unwind tension auto controller with load cell sensor.
- Magnetic powder clutch for rewind tension control.
- Razor cutting in groove roller method.
- Upper & lower rewind shaft opposite winding mechanism.
-
FSL-BT Surface Winding : Slitter Rewinder Machine
For slitting thin and slip plastic films of uniform thickness.
For surface winding laminating paper, aluminum foil, stretch film, isolated paper, labels, and other paper rolls.
For slitting electronics, computer and optical materials, film roll and foil roll.
◇Feature:
1.Unwinding Section- Lift-up & floating type unwind stand with 3" air shaft.
- The tension is sensed by load cell sensor and compared to the set tension.
- Pneumatic nip rubber roller: providing perfect tension isolation.
- Razor cutting in the groove roller method.
- Statics eliminator.
- Equipped with trim reject fan and left/right moving type trim winder.
- Two independent motors controlled each rewinding shaft for the most accurate tension output.
- Rewinding diameter feedback system assures extremely stable rewinding tension without the need to adjust the tension according to speed and diameter variables.
- Rewind shafts auto ascent/ descent mechanism help heavy rolls unloading.
- LCD colorful touch screen.
- Dialogue parameter setting environment.
- Parameters memory function.
- Tension computes function.
- Tension control auto/manual.
- Unwind auto stop and material exhausted stop.
- Meter reached auto stop.
- Rewind tension auto increase.
- Web guiding system (printing line & edge)
- Hydraulic ascent/descent unwind stand.(dia.1,000mm)
- Shear knives cutting method.
- Vacuum type trim disposal system.
- Special size of rewind shaft.
-
FSL-D Small : Roll Slitter Rewinder
The Small Roll Slitter is ideal for slitting large parent roll into small bobbins such as POS, ATM, cash register, ticket, receipt, thermal paper, fax, lottery, medical report and various paper roll for office use.
◇Feature:
1.Unwinding Section- Lift-up & floating type stand with air shaft.
- Simplified construction for trouble less.
- Shear knives cutting method especial for paper slit.
- Equipped with trim reject fan which can blow the trim out.
- An exclusive patented magnetic powder type surface rewinding mechanism allowing rewind tension to be easily adjusted according to the material’s characteristics. It also reduces the wear of driving rubber roller.
- Equipped with meter counter which can stop automatically when preset length reached.
- End roll warning device, for reminding the user to change the roll when the warning mark appeared.
- Web guiding system (edge).
- Two-ply unwind stand.
- Hydraulic ascent / descent unwind stand. (dia.1,000mm)
- Unwind tension auto controller with load cell sensor.
- Vacuum type trim disposal system.
- Special size of rewind shaft.
- Pneumatic rewind lay-on roller.
-
FSH Side Sealing : Slitters Rewinders- For Side Sealing Slitter Operations: Suitable for producing various film rolls for extruded materials, such as HDPE, LDPE, LLDPE, PP, CPP, and etc.. Product thickness range from 0.006 to 0.1 mm. Production speed 20-40 meters per minute in 2-6 lines (Slit width over 40mm).
- For Regular Slitter Rewinder Operations: Suitable for slitting various materials, such as, cellophane, PET, OPP, CPP, PE, PS, PVC film rolls and printed films.
◇Feature:
1.Unwinding Section- The cantilever (swing out) unwind shafts can be easily handled by a single operator.
- Equipped with web adjustment roller. It can reduce the winkle that cause by the low parent roll quality.
- Duo cutting system: razor cutting in the air for regular films and heating knives for sealable films.
- The side sealing slitter mechanism employs exclusive electrical resistor knives (heating knives). Once power is on, the knives are instantly heated to the normal working temperature for immediate operation.
- Heating cutter auto ascending mechanism.
- Statics eliminator equipped.
- Equipped with trim reject fan which can blow the trim out directly.
- Swing out type rewinding shaft for easy operation.
- The rewinding mechanism is designed incorporating HCI friction quick lock rings to overcome the problems of material thickness variation.
- Rewinding Lay-on roller *4 sets.
- Length can be easily preset during operation. When the pre-set length is reached, the machine stops automatically.
- Triangular folding unwind stand.
- Web guiding system (printing line & edge).
- Unwind tension auto controller with load cell sensor.
- Magnetic powder clutch for rewind tension control.
- Air shafts winding mechanism.
- Upper & lower rewind shaft opposite winding mechanism.
- Vacuum type trim disposal system.
-
Slitter Rewinders
- Rewinding Machines
- Bag Making Machines
- Laminating Machines
- Seaming Machines
- Cutting Machines
- Embossing Machines
- Flexible Packaging Machines
HCI Converting Equipment Co., Ltd
Telephone: +886-4-23590632
Fax: +886-4-23590710
Address: 26, 7th Road, Taichung Industrial Park, Taichung, Taiwan
Telephone: +886-4-23590632
Fax: +886-4-23590710
Address: 26, 7th Road, Taichung Industrial Park, Taichung, Taiwan
Site Map