Slitter Rewinder | Slitters Rewinders | manufacturer supplier from factory Wholesaler Distributor

Slitters Rewinders

FSL-V Slitter Rewinder is specially designed for the plastic films which are of variable thicknesses, low tension demand or tension strictness. It is also suit for slitting a wide variety of materials such as, cellophane, PET, OPP, CPP, PE, PVC, paper roll, and printed films.

Specifications	FSL-V1300 Slitter Rewinder
Mechanical Speed (m/min)	400
Un. Stand	Shaftless with Pneumatic Chuck & Floating Type
Core Inner Diameter (mm)	76 / 3" or (152 / 6" Optional)
Web Width (mm)	320 - 1,300
Maximum Unwind Diameter (mm)	1,000
Un. Tension Control	Magnetic Powder Brake With Load Cell Sensor
Web Guiding System	Printing Line / Edge
Guider Movement (mm)	+/- 50
Slitting Techniques	Razor In Groove Roller / Shear Knives
Trim Removal	Vacuum Type Trim Disposal
Minimum Re. Web Width (mm)	50
Maximum Re. Diameter (mm)	600
Rewind Tension Control	HCI Differential Winding Technology (Inner pressure type)

◇Feature:

Equipped with shaftless & pneumatic-chuck unwind stand.
Auto un. tension control.
Two servomotor drive system providing the most accurate winding control.
Adopted duo slitting system on the V series slitter rewinder.
Rewinding Individual lay-on roller 4 sets.
Laser core positioning system. (optional)
Products discharge device.
Inner pressure type differential rewinding shafts.
Micro computer controller

LCD colorful touch screen and simple figure display for setting.
Dialogue parameter setting environment for fast start.
Rewind tension auto increase function.
Unwind auto stop and material brake stop function.
Parameters memory function: included material thickness, initial diameter,tension and so on.

Paper Slitter Rewinder

The T Series Slitter Rewinder is designed for slitting all types of flexible packaging films, photonics and optical materials. Such as cellophane, PET, OPP, CPP, PE, PVC, paper rolls, counterfeit-proof labels. The HCI FSL-T Series is a universal Slitter Rewinder on the market.

Specifications	FSL-T1300 Slitter Rewinder
Mechanical Speed (m/min)	300
Un. Stand	Shaftless with Pneumatic Chuck & Floating Type
Core Inner Diameter (mm)	76 / 3" or (152 / 6" Optional)
Web Width (mm)	320 - 1,300
Maximum Un. Diameter (mm)	1,000
Web Guiding System	Printing Line / Edge
Guider Movement (mm)	+/- 50
Slitting Techniques	Razor In Groove Roller / Shear Knives
Trim Removal	Vacuum Type Trim Disposal
Minimum Re. Web Width (mm)	50
Maximum Re. Diameter (mm)	600

◇Feature:
1.SHAFTLESS & PNEUMATIC-CHUCK UNWIND STAND

The left and right unwind arms are dived by motor; the operator can adjust the width freely.
Equipped with pressure chuck for clamp the parent roll quick and easy.
Unwind control panel.
Single operator is required to manipulate and load the parent roll.

2.WEB GUIDING SYSTEM

Whole unwind stand can move horizontally, left and right each 50 mm. It can ensure the accuracy of slitting position.
The guiding operates in two modes: Web edge & Printing line guiding

3.THREE MOTORS WINDING (Standard on T Slitter Rewinder)

Three individual motors: One motor drives upper rewind shaft, one drives lower rewind shaft and the third motor is connected to the main drive roller.

4.UNWIND AUTO TENSION CONTROL

The unwind tension is sensed by load cell and compared to setting value. The PLC will increase or decrease it according to the calculating difference automatically. It can maintain the stable tension output during whole slitter operation.

5.PNEUMATIC NIP RUBBER ROLLER

Tension isolation point through pneumatic nip rubber roller, giving perfect isolation between the unwind and rewind. It also ensures no slippage or scratches when Slitter running.

6.DUO SLITTING TECHNIQUES

Razor in groove roller & Shear knifes.
Equipped with shaft tracks, ease for installation.
Equipped with protecting cover, prevent personal injured.

7.VACUUM TYPE TRIM DISPOSAL

All FSL-T Slitter are equipped with vacuum type trim disposal. Specially designed ejectors with powerful ventilators remove the slit edge of web.

8.ANTI STATICS BRUSHES

Anti statics brushes discharge electrostatic charge when plastic material is being slit and rewound. There are two sets of anti statics brushes, one prior to upper rewind shaft, the other prior to lower rewind shaft.

9.HCI DIFFERENTIAL WINDING TECHNOLOGY

Automatic calculation control for rewinding tension employs HCI's self-developed precision friction rewinding ring, combined with automatic side-pressure compensation. Two independent rewinding motors and an intelligent rewinding diameter control system assure extremely stable rewinding tension without the need to adjust it when speed and diameter varied.

10.INDIVIDUAL LAY-ON ROLLER

Equipped with 4 sets of independent lay-on roller. It can adjust the position and width according to the actual slit rolls. It guarantees full contact between lay-on roller and slit roll. To built the good slit roll structure.

11.PRODUCTS DISCHARGE DEVICE

Equipped with products discharge device: helps heavy rolls unloading as well as efficiency during slit roll exchange.

12.PLC - PROGRAMMABLE LOGIC CONTROLLER

Upgrade to Servo motors driven is available for FSL-T Slitter.
LCD colorful touch screen.
Dialogue parameter setting environment.
Parameters memory function.
Tension computes function.
Unwind auto stop and break stop function.
Meter reached auto stop function.
Upper and lower rewind shaft different winding direction function.
Rewind tension auto increase function.

Slitter Rewinder Machines

HCI Newly develop Slitter Rewinder, the FSL-KA Series Slitter Rewinder is designed for slitting a wide variety of materials such as, cellophane, PET, OPP, CPP, PE, PVC, paper rolls, and printed materials.

Specifications	FSL-KA1300 Slitter Rewinder
Mechanical Speed [m/min]	300
Unwind Core Inner Diameter [mm]	76 / 3" or 152 / 6"
Unwind Web Width [mm]	320-1300
Maximum Unwind Diameter [mm]	800
Unwind Tension Control	Magnetic Powder Brake With Load Cell Sensor
Web Guiding System	Printing Line / Edge
Guider Movement [mm]	+/- 70
Slitting Techniques	Razor In Groove Roller/ Shear Knives
Trim Removal	Blower with Trim Winder
Rewind Core Inner Diameter [mm]	76 / 3"
Minimum Rewind Web Width [mm]	50
Maximum Rewind Diameter [mm]	500
Rewind Tension Control	HCI Quick-Lock Type Individual Friction Winding Technology

◇Feature:
1.The Integral Structure of FSL-KA Slitter Rewinder

This compact design occupies minimal floor space. Unwind and rewind is designed in same side providing the most convenient operation.
Enlarge the roll capacity: unwind diameter can reach to 800mm; rewind diameter can reach to 500mm. Reducing the loading frequency and expanding the applied ranges.

2.Shaftless & Pneumatic-Chuck Unwind Stand

The left and right unwind arms are driven by motors and liner guideway, each arm can move individually. Especially for the parent roll which is uneven seriously.(New structure only on FSL-KA Slitter Rewinder)
Equipped with pneumatic chuck for clamp the parent roll efficiently and easy.
Quick change for different size of chucks.
Equipped with web adjustment roller. It can reduce the winkle that cause by the low parent roll quality.

3.Web Guiding System

Whole unwind stand can move horizontally, left and right each 70 mm. It can ensure the accuracy of slitting position. The guiding system operates in two modes:
a. Web edge guiding
b. Printing line guiding

3.Three Motors Winding System

Three individual motors: One motor drives upper rewind shaft, one drives lower rewind shaft and the third motor is connected to the main drive roller.
The operator can set the tension and material thickness for each rewind shaft separately.
The winding direction of rewind shaft can be change in any time and upper and lower shaft can run different direction also.

4.Auto Unwind Tension Control

The unwind tension is sensed by load cell and compared to the set tension. The microcomputer control system will increases or decreases tension according to the calculated the tension difference automatically. It can maintain the stable tension output during whole operation.

5.Main Drive Nip Roller

Tension isolation point through pneumatic nip rubber roller, giving perfect tension isolation between unwind and rewind. It also ensures no slippage or scratches.

6.Duo Slitting System

Shear knives and razor blades are able to work independently or simultaneously. Due to compact machine design the change of slitting method is easily achieved.
Segmented groove roller can insert to the lower knife shaft directly. It is possible to change groove roller without removal any shaft.
Upper knife shaft tracks designed for quick install of male knives.
Lower knives shaft is equipped by cantilevered joint. It reduces the job exchange time greatly. The arrangement for aluminum spacers and female knives can be done without take the lower shaft out.(New Design Only on KA Series Slitter Rewinder)
Equipped with protecting cover for slitting section, prevent personal injured.

7.Trim Disposal

Equipped with trim reject fan. Specially designed ejectors with powerful ventilators remove the slit edge of web.

8.Statics Eliminator

It discharges electrostatic charge while plastic film is being slit and rewound.

9.Laser Core Positioning System

A manual laser adjustment system enables the operator to reload new cores quickly and accurately minimizing the setup time. The laser indicates the core position on the rewind shafts allow precise positioning of cores. (Optional Accessories for KA1300 Slitter Rewinder)

10.Hci Quick-Lock Type Individual Friction Winding Technology (Patent No. 131681)

Automatic calculation control for rewinding employs HCI's self-developed precision friction rewinding ring, combined with automatic side-pressure tension compensation. Two independent rewinding motors. Rewinding tension is controlled by a fully-automatic air control system. An intelligent rewinding diameter control system assures extremely stable rewinding tension without the need to adjust the tension according to speed and diameter variables. Set the setting tension according to the initial condition, and then the entire tension - from initiation to finalization - is automatically controlled by memory and feedback.

11.Pneumatic Lay-On Rollers

Adopted with 2 sets of pneumatic lay-on rollers for build the good slit roll structure.

12.Products Discharge Device

Equipped with products discharge device: helps heavy rolls unloading as well as efficiency during slit roll exchange.

13.Mirco Computer Control System

Adopted with industrial micro computer providing the accurate and stable control.
LCD colorful touch screen and simple figure display for setting.
Dialogue parameter setting environment for fast start.
Tension control auto/manual function.
Adopted with two rewind tension control programs: Rewind Torque mode & Rewind Speed mode.
Rewind tension auto increase function.
Upper and lower rewind shaft different winding direction function.
Tension simulate function.
Unwind auto stop and material brake stop function.
Parameters memory function: included material thickness, initial diameter, tension and so on.

Rewinder Slitter

For all types of slitting on such materials as Cellophane, PET, CPP, OPP, PE, PS, PVC, etc., paper film-both plain and printed. For slitting counterfeit-proof labels on computers, electronics, computer and optical materials, film roll and foil roll.

Specifications	FSL-K1300 Slitter Rewinder
Mechanical Speed (m/min)	200
Unwind Stand	Shafted & Floating Type
Unwind Core Inner Diameter (mm)	76 / 3" or (152 / 6" Optional)
Unwind Web Width (mm)	500 - 1,300
Maximum Unwind Diameter (mm)	700
Unwind Tension Control	Magnetic Powder Brake
Slitting Techniques	Razor / Shear Knives
Trim Removal	Blower with Trim Winder
Rewind Core Inner Diameter (mm)	76 / 3"
Minimum Rewind Web Width (mm)	50
Maximum Rewind Diameter (mm)	450
Rewind Tension Control	Magnetic Powder Clutch + HCI Friction Quick Lock Rings

◇Feature:
1.The best selling model from 1992 to 2008
2.A mature model with all the standardized parts.
3.Flexible specifications are available with a variety of optional accessories.
4.This compact design occupies minimal floor space.
5.Extensive safety guards.
6.Unwinding Section

Unwind and rewind is designed in same side providing the most convenient operation.
The transmission mechanism is specially designed to ensure stable operation and perfect edge smoothness.
Lift-up & floating type unwind stand with 3" air shaft. Single operator is required to manipulate and load the parent roll.
Equipped with web adjustment roller. It can reduce the winkle that cause by the low parent roll quality.

7.Slitting Section

Duo cutting system: razor cutting in the air and shear knives.
Equipped with statics eliminator, it discharges electrostatic charge while plastic film is being slit and rewound.
Equipped with trim reject fan and left/right moving type trim winder. Trim winder is designed on machine side saved floor space and the winding tension is adjustable.

8.Rewinding Section

Cantilevered rewinding shaft for easy operation. (Swing out type)
The rewinding mechanism is designed incorporating HCI friction quick lock rings to overcome the problems of material thickness variation.
Rewinding Lay-on roller *4 sets.
Equipped with meter counter which can stop the machine automatically when preset length reached.

9.Optional Accessories

Web guiding system (printing line & edge)
Hydraulic ascent / descent unwind stand: unwind dia.1,000mm, rewind dia. 600mm
Unwind tension auto controller with load cell sensor.
Rewind tension auto controller.
Razor cutting in groove roller method.
Vacuum type trim disposal system.

Paper Slitter Rewinder

For all kinds of high grade thin paper, cellophane, plastic film, and aluminum foil. Especially suitable for positive, and negative foils of condenser and electrolyze paper. For slitting electronics, computer and optical materials, film roll and foil roll.

Specifications	FSL-J600 Narrow Width Slitter Rewinder
Mechanical Speed (m/min)	0-100
Unwind Stand	Shafted & Flxed Type
Unwind Core Inner Diameter	3"
Unwind Web Width (mm)	200 - 600
Maximum Unwind Diameter (mm)	500
Unwind Tension Control	Magnetic Powder Brake
Slitting Techniques	Shear knives
Rewind Core Inner Diameter (mm)	40 (Or Request)
Minimum Rewind Web Width (mm)	10 (5mm On Request)
Maximum Rewind Diameter (mm)	270
Rewind Tension Control	Magnetic Powder Clutch

◇Feature:
1.Unwinding Section

This compact design occupies minimal floor space.
Swing out & fixed type unwind stand with 3" air shaft. Single operator is required to manipulate and load the parent roll.
The rollers are tightly arranged to decrease tolerance of cross and longitudinal winding of material.

2.Slitting Section

Shear knives cutting method.

3.Rewinding Section

The speed can be easily varied to accommodate tension difference caused by the changing diameter of the winding material.
The winding and feeding motions are driven by a universal satellite gear transmission.
Equipped with meter counter which can stop the machine automatically when preset length reached.

4.Optional Accessories

Unwind tension auto controller with load cell sensor.
Rewind tension auto controller.
Vacuum type trim disposal system.
Special size of rewind shaft.

Rewind Slitter

For all types of slitting on materials such as, Cellophane, PET, CPP, OPP, PE, PS, PVC, paper film-both plain and printed, and etc.. For slitting counterfeit-proof labels on computers, electronics, computer and optical materials, film roll, and foil roll.

Specifications	FSL-1300 Slitter-Rewinder
Mechanical Speed (m/min)	0-150
Core Inner Diameter (mm)	76 / 3" or (152 / 6" Optional)
Web Width (mm)	400 - 1,300
Maximum Un. Diameter (mm)	600
Tension Control	Magnetic Powder Brake
Slitting Techniques	Razor / Shear Knives
Minimum Re. Web Width (mm)	50
Maximum Re. Diameter (mm)	400

◇Feature:
1.Unwinding Section

Unwind and rewind is designed in same side providing the most convenient operation.
Swing out & floating type stand with 3" air shaft. Single operator is required to manipulate and load the parent roll.
Equipped with web adjustment roller. It can reduce the winkle that cause by the low parent roll quality.

2.Slitting Section

Duo cutting system: razor cutting in the air and shear knives.
Equipped with statics eliminator, it discharges electrostatic charge while plastic film is being slit and rewound.
Equipped with trim reject fan and trim winding shaft*2.

3.Rewinding Section

Cantilevered shaft (Swing out type) for easy operation.
The rewinding mechanism is designed incorporating HCI friction bakelite rings to overcome the problems of material thickness variation.
Lay-on roller *4 sets.
Equipped with meter counter which can stop the machine automatically when preset length reached.

4. Optional Accessories for FSL Series Slitter-Rewinder

Web guiding system. (printing line & edge)
Dia. 1000mm unwind stand.
Unwind tension auto controller with load cell sensor.
Magnetic powder clutch for rewind tension control.
Razor cutting in groove roller method.
Upper & lower rewind shaft opposite winding mechanism.

Slitter Rewinder Machine

For slitting thin and slip plastic films of uniform thickness.
For surface winding laminating paper, aluminum foil, stretch film, isolated paper, labels, and other paper rolls.
For slitting electronics, computer and optical materials, film roll and foil roll.

Specifications	FSL-BT1300 Surface Winding Slitter Rewinder
Mechanical Speed (m/min)	0-200
Core Inner Diameter (mm)	76 / 3" or (152 / 6" Optional)
Web Width (mm)	400 - 1,300
Maximum Unwind Diameter (mm)	600
Unwind Tension Control	Magnetic Powder Brake With Load Cell Sensor
Slitting Techniques	Razor In Groove Roller
Trim Removal	Blower with Trim Winder
Minimum Rewind Web Width (mm)	20
Maximum Rewind Diameter (mm)	500
Rewind Tension Control	Vector Motor *2

◇Feature:
1.Unwinding Section

Lift-up & floating type unwind stand with 3" air shaft.
The tension is sensed by load cell sensor and compared to the set tension.
Pneumatic nip rubber roller: providing perfect tension isolation.

2.Slitting Section

Razor cutting in the groove roller method.
Statics eliminator.
Equipped with trim reject fan and left/right moving type trim winder.

3.Surface winding Section

Two independent motors controlled each rewinding shaft for the most accurate tension output.
Rewinding diameter feedback system assures extremely stable rewinding tension without the need to adjust the tension according to speed and diameter variables.
Rewind shafts auto ascent/ descent mechanism help heavy rolls unloading.

4.Man-Machine Interface Control System

LCD colorful touch screen.
Dialogue parameter setting environment.
Parameters memory function.
Tension computes function.
Tension control auto/manual.
Unwind auto stop and material exhausted stop.
Meter reached auto stop.
Rewind tension auto increase.

5.Optional Accessories

Web guiding system (printing line & edge)
Hydraulic ascent/descent unwind stand.(dia.1,000mm)
Shear knives cutting method.
Vacuum type trim disposal system.
Special size of rewind shaft.

Roll Slitter Rewinder

The Small Roll Slitter is ideal for slitting large parent roll into small bobbins such as POS, ATM, cash register, ticket, receipt, thermal paper, fax, lottery, medical report and various paper roll for office use.

Specifications	FSL-D800 Roll Slitter
Mechanical Speed (m/min)	0-150
Unwind Core Inner Diameter	3" or 6"
Web Width (mm)	300 - 800
Maximum Unwind Diameter (mm)	600
Slitter Techniques	Shear knives
Trim Removal	Trim Blower
Rewind Core Inner Diameter	1/2" - 3"

◇Feature:
1.Unwinding Section

Lift-up & floating type stand with air shaft.
Simplified construction for trouble less.

2.Slitter Section

Shear knives cutting method especial for paper slit.
Equipped with trim reject fan which can blow the trim out.

3.winding Section

An exclusive patented magnetic powder type surface rewinding mechanism allowing rewind tension to be easily adjusted according to the material’s characteristics. It also reduces the wear of driving rubber roller.
Equipped with meter counter which can stop automatically when preset length reached.
End roll warning device, for reminding the user to change the roll when the warning mark appeared.

4.Optional Accessories for FSL-D Roll Slitter

Web guiding system (edge).
Two-ply unwind stand.
Hydraulic ascent / descent unwind stand. (dia.1,000mm)
Unwind tension auto controller with load cell sensor.
Vacuum type trim disposal system.
Special size of rewind shaft.
Pneumatic rewind lay-on roller.

Slitters Rewinders

For Side Sealing Slitter Operations: Suitable for producing various film rolls for extruded materials, such as HDPE, LDPE, LLDPE, PP, CPP, and etc.. Product thickness range from 0.006 to 0.1 mm. Production speed 20-40 meters per minute in 2-6 lines (Slit width over 40mm).
For Regular Slitter Rewinder Operations: Suitable for slitting various materials, such as, cellophane, PET, OPP, CPP, PE, PS, PVC film rolls and printed films.

Specifications	FSH-1500 Side Sealing Slitter Rewinder
Mechanical Speed (m/min)	0-100
Unwind Stand	Shafted & Floating Type
Unwind Core Inner Diameter (mm)	76 / 3"
Unwind Web Width (mm)	400 - 1,500
Maximum Unwind Diameter (mm)	600
Unwind Tension Control	Magnetic Powder Brake
Slitting Techniques	Razor / Heating Knife
Trim Removal	Trim Blower
Rewind Core Inner Diameter (mm)	76 / 3"
Minimum Rewind Web Width (mm)	100
Maximum Rewind Diameter (mm)	450
Rewind Tension Control	HCI Friction Quick Lock Rings

◇Feature:
1.Unwinding Section

The cantilever (swing out) unwind shafts can be easily handled by a single operator.
Equipped with web adjustment roller. It can reduce the winkle that cause by the low parent roll quality.

2.Slitter Section

Duo cutting system: razor cutting in the air for regular films and heating knives for sealable films.
The side sealing slitter mechanism employs exclusive electrical resistor knives (heating knives). Once power is on, the knives are instantly heated to the normal working temperature for immediate operation.
Heating cutter auto ascending mechanism.
Statics eliminator equipped.
Equipped with trim reject fan which can blow the trim out directly.

3.Rewinder Section

Swing out type rewinding shaft for easy operation.
The rewinding mechanism is designed incorporating HCI friction quick lock rings to overcome the problems of material thickness variation.
Rewinding Lay-on roller *4 sets.
Length can be easily preset during operation. When the pre-set length is reached, the machine stops automatically.

4.Optional Accessories

Triangular folding unwind stand.
Web guiding system (printing line & edge).
Unwind tension auto controller with load cell sensor.
Magnetic powder clutch for rewind tension control.
Air shafts winding mechanism.
Upper & lower rewind shaft opposite winding mechanism.
Vacuum type trim disposal system.

Rewind Machine

1.The FSE-2 Roll Rewinding Machine and Roll Inspecting machine is design for

Surface inspecting for all kind of round roll such as flexible packaging, electronics, TFT-LCD and optical materials.
Defective inspection of the printed film and laminates.
Convert small rolls into big rolls, or vice versa.
Re-reeling operation of slit roll with uneven edges or tension.

Specifications	FSE-1300-2 Roll Inspecting Machine
Mechanical Speed (m/min)	0-250
Unwind Stand	Shaftless with Pneumatic Chuck & Floating Type
Unwind Core Inner Diameter (mm)	76 / 3" or (152 / 6" Optional)
Unwind Web Width (mm)	320-1,300
Maximum Unwind Diameter (mm)	800
Unwind Tension Control	Servo Motor + Load Cell Sensor
Web Guiding System	Edge
Trim Slitting Mechanism (Optional)	Razor Cutting + Vacuum Type Trim Disposal
Rewind Core Inner Diameter (mm)	76 / 3" or (152 / 6" Optional)
Maximum Rewind Diameter (mm)	800
Rewind Tension Control	Servo Motor

◇Feature:
1.Unwinding Section

The left and right unwind arms are dived by motor; the operator can adjust the width freely.
Equipped with pressure chuck for clamp the parent roll quick and easy.
Adopted edge guiding system, the smoothest rewinding edge is ensured.
Equipped with unwind control panel, single operator is required to manipulate and load the parent roll.
Unwind is driven by servo motor with inverter providing the most accurate control.
The winding tension is sensed by load cell and compared to set tension. The control system will increases or decreases tension according to the calculated the tension difference automatically. It can maintain the stable tension output during whole operation.

2.Slitting Section (Optional on FSE-2 Roll Inspecting Machine)

One machine with two functions: Install a trimming cutting unit for edges slitting.
Equipped with vacuum type trim disposal system. Specially designed ejectors with powerful ventilators remove the edge of web.

3.Inspecting Section

Equipped with observed board and fluorescent lamps for visual checking.
Length memorized and auto reverse function.

4.Rewinding Section

Rewind is driven by servo motor with inverter providing the most accurate control.
The rewinding direction can be changed in any time with forward / reverse jogging functions.
Equipped with pneumatic lay-on roller.

5.Micro-computer Control System

Adopted with industrial micro computer providing the accurate and stable control.
10" LCD colorful touch screen and simple figure display for setting.
Unwind auto stop and material exhausted stop function.
Rewind tension auto increase function.
Winding directions reverse function.
Meter reached auto stop function.
50 Sets of parameters memory function

6.Optional Accessories

1,000 width synchronic flash light: Stroboscope for inspecting the defectives of the printed film.
Splicing table with pneumatic press-bar.
Trim cutting mechanism.
Statics eliminator.
CE mark approved.

Rewind Machine

FSR-300 Reversible Rewinding Machine is designed for rewinding operation of slit rolls, reels with uneven edge, or tension. Especially for rewinding on films with laminating paper, aluminum foil and other paper rolls after slitting.

Specifications	FSR-300 Reversible Rewinding Machine
Mechanical Speed [m/min]	0-250
Unwind Stand	Cantilevered Air shaft
Unwind Core Inner Diameter [mm]	76 / 3" or (152 / 6" Optional)
Unwind Web Width [mm]	50-300
Maximum Unwind Diameter [mm]	600
Unwind Tension Control	Servo Motor

◇Feature:
1.Unwinding and Rewinding Section

Cantilevered air shafts make the loading and unloading quick and easy. Single operator is required to operate the machine.
All FSR Rewinding Machine adopted ACCUWEB edge guiding system, the smoothest rewinding edge is ensured.
Two servo motors with inverter providing the most accurate winding tension control.
The rewinding direction can be changed in any time with forward / reverse jogging functions.
Statics eliminator.
Pneumatic lay-on roller.

2.Man-Machine Interface Control System

LCD colorful touch screen.
Winding directions reversible.
20 sets of length memorized & auto stop.
Rewind tension auto increase.
Unwind auto stop and break stop.
Meter reached auto stop.

3.Optional Accessories

Synchronic flash light: Stroboscope for inspecting the defectives of the printed film.
Splicing table with pneumatic press-bar.
Dancing roller tension control mechanism: For material which is stretched easily or need to winding with lower tension.

Rewind Machines

For re-reeling operation of slit rolls with uneven edges or tension. FSR Rewinding Machine will help you to achieve high quality re-reeling, even without the use of an advanced slitting machine.
Especially ideal for an automatic filling packaging machine which requires a large reel diameter and rigorous tension quality.

Specifications	FSR-600 Rewinding Machine
Mechanical Speed [m/min]	0-200
Unwind Stand	Swing Out Type
Unwind Core Inner Diameter [mm]	76 / 3"
Unwind Web Width [mm]	100-600
Maximum Unwind Diameter [mm]	600
Web Guiding System	Edge (Center Guiding Type)
Rewind Core Inner Diameter [mm]	76 / 3"
Maximum Rewind Diameter [mm]	600

◇Feature:
1.Swing out type unwind stand with 3" air shaft, makes the loading easer.
2.Employs the high precision web guiding system to turn the defective products into qualified products.
3.The constant rewinding tension is ensured by using the load cell sensor incorporate with auto tension controller.
4.Rewind tracing roller mechanism which can vary with rewind diameter due to maintain the same winding angle. This mechanism can improve the rewinding quality greatly.
5.Equipped with statics eliminator and rewind lay-on roller.
6.The man-machine interface control system is available as an option.

LCD colorful touch screen.
Tension control auto/manual function.
Unwind auto stop and break stop function.
Meter reached auto stop function.

Doctoring Machine

Quality inspection of round rolls.
Surface inspection after printing.
Roll small rolls into big rolls or vice versa.
For quality inspection for converting materials, electronics, computer and optical materials, film roll and foil roll.

Specifications	FSE-1600 Doctoring and Rewinding Machine
Mechanical Speed [m/min]	0-150
Unwind Stand	Floating Type
Unwind Core Inner Diameter [mm]	76 / 3"
Unwind Web Width [mm]	300-1600 (1000 / 1300)
Maximum Unwind Diameter [mm]	600
Unwind Tension Control	Magnetic Powder Brake
Web Guiding System	Edge
Rewind Core Inner Diameter [mm]	76 / 3"
Maximum Rewind Diameter [mm]	600
Rewind Tension Control	Magnetic Powder Clutch

◇Feature:
1.The unwind stand is easily adjusted to accommodate a variety of materials and sizes.
2.Adopted edge guiding system, the smoothest rewinding edge is ensured.
3.Large diameter driving wheels are made of rubber to prevent marking scrape of web.
4.A magnetic powder clutch ensures the correct tension for different materials.
5.Equipped with observed board and fluorescent lamps for visual inspecting.
6.Equipped with statics eliminator and rewind lay-on roller.
7.Equipped with defective material winder which can wind the waste web onto directly.
8.Optional Accessories

Unwind tension auto controller with load cell sensor.
Rewind tension auto controller.
1000 width synchronic flash light.

Rewinder Machine

Designed for rewinding and distributing big rolls of aluminum foil into small ones.

Specifications	FDE-600 Aluminum Foil Rewinding Machine
Unwind Core Inner Diameter [m/min]	76 / 3"
Unwind Width [mm]	200-600
Maximum Unwind Diameter [mm]	400
Unwind Tension Control	Magnetic Powder Brake
Rewind Core Inner Diameter [mm]	1" - 2"
Maximum Rewind Length	20m
Rewind Tension Control	Magnetic Powder Clutch
Main Drive	AC Motor
Mechanical Speed [m/min]	0-100

◇Feature:
1.Simplified structure and easy to maintain.
2.Swing out type unwind stand with 3” air shaft. Single operator is required to manipulate and load the parent roll.
3.Auto rewinding shafts exchanging mechanism provide the nonstop production.
4.Flexible accommodation of paper cores in various diameters.
5.Equipped with meter counter which can stop the machine automatically when preset length reached.

Rewinder Machines

Especially designed for folding and rewinding processes of plastic films. The folded edge is neat and stable after rewound. This Folding and Rewinding Machine can easily transform flat film into folding form.

Specifications	FND-R1000 Folding and Rewinding Machine
Mechanical Speed [m/min]	0-150
Core Inner Diameter [mm]	76 / 3"
Unwind Web Width [mm]	300-1000
Maximum Unwind Diameter [mm]	600
Maximum Rewind Diameter [mm]	420

◇Feature:
1.Horizontal unwind stand, the position of lift-up type 3” mandrel is adjustable.
2.Web folding device, quick adjustment and constant edge.
3.Unwind adopt powder brake and main drive adopt AC motor.
4.Swing out type rewind mandrel for fast loading.
5.Rewind lay-on roller ensures the winding quality.
6.Equipped with meter counter which can stop the machine automatically when preset length reached.
7.Optional Accessories

3” Unwind air shaft
Web guiding system (edge)
Unwind tension auto controller with load cell sensor
Unwind tension auto controller
3” air shaft rewinding device
statics eliminator
Trimming device (After folded)

Bags Making Machines

Suitable for sealable co-extrusion films, multi-layer films such as laminates of Polyester,BOPP and CPP... The FTSC-V Pouch Making Machine is ideal for the production of 3-side sealing bag, stand-up pouch, bottom gusseted stand-up pouch, zipper pouch, combined stand-up/zipper pouch.

FTSC-V500, -V600 : Three Side Seal Pouch Making Machine
FTSC-V500-2, -V600-2 : Three Side Seal Bag/ Stand-Up Pouch Making Machine
FTSC-V500-3, -V600-3 : Three Side Seal Bag/ Stand-Up Pouch/ Zipper Pouch Making Machine

Specifications	FTSC-V500-3 Pouch Making Machine	FTSC-V600-3 Pouch Making Machine
Material Width (mm)	300 - 1,000	400 - 1,200
Material Diameter (mm)(max.)	600	600
Bag Length (mm)(Max. 1,200mm skip-seal production)	30 - 500	30 - 500
Bag Width (mm)(Min. 75mm Multi-Lane Production)	150 - 500	200 - 600
Mechanical Speed (bags/min.)	150	150
Feeding Speed (m/min.) (max.)	30	30
Production Line	Three side sealing bag 1 - 3 Lanes	Three side sealing bag 1 - 3 Lanes
	Stand up / zipper pouch 1 - 2 Lanes	Stand up / zipper pouch 1 - 2 Lanes
	Bottom gusseted pouch 1 lane	Bottom gusseted pouch 1 lane

◇Feature:
1.Main Mechanism

Main drive servo motor: The operator can change the feeding and sealing time for each material independently. Sealing temperature adjustment unnecessary while machine speed up. This mechanism can help to reduce the lost of material greatly.
Feeding servo motor*2: The pouch length is accurately controlled by servo motor includes middle pulling stand and rear pulling stand for upgrading production speed.
Outer transmission mechanism: Compared with inner transmission mechanism, the structure of brand-new outer transmission mechanism is much simple and ease to maintenance
The new FTSC-V pouch making machine can give about 30% more productivity than conventional bag making machines.

2.Pouch Making Machine Capability

One machine can produce various pouches such as three side sealing bag, stand up pouch, bottom gusseted stand up pouch, zipper pouch, combined stand up and zipper pouch.

3-side sealing bag: 3 lanes production and the skip seal function can reach 9 times of feeding length. (max.1,200mm).
Stand up pouch and zipper pouch: 2 lanes production.
Bottom gusseted stand up pouch: 1 lane production if two functions unwind stand is purchased (Patent No.M254422). The depth of bottom gusseted is adjustable and the gusseted point sealer can provide accurate forming position without film slip problem.

3.Web Handing And Tension Control

The film takes many processes to convert to a pouch of demand size and shape. Most of the process are forming (folding and/or gusset forming), sealing in longitudinal and transverse directions, inserting other substrates such as zipper and gusset. Appropriate tension control is important to the composing process. The new FTSC-V Pouch Making Machine can set different tension values for each special tension zone to ensure the precise performance during pouch making machine running.
Unwinding and forming zone: including unwind buffer roller unit and center partition buffer roller unit, the operator can use different buffer roller unit according to pouch shape. Each buffer roller unit is using the VR (Variable resistor) for auto speed varied and assures that the most stable web feeding even under high speed operation.
Zipper / gusset inserting and zipper pouch sealing zone: The film enters into intermittent path from this zone. The zipper inserting tension is controlled by motor incorporated buffer roller unit in order to cope with the rush pulling that cause by intermittent path.
Side sealing zone: The film is sealed longitudinally in this zone. And the tension is adjusted by the rear pulling stand which driven by servo motor and micro location offset via dancing roller control system.
Bottom sealing zone: The film is sealed transversely in this zone. Therefore to avoid stretch in sealed area is the prime need. Through the middle pulling stand and micro location offset via dancing roller control system maintaining the minimum tension.

4.Unwind Section

Horizontal unwind stand and 3" air shaft incorporate with pneumatic loading device. Single operator is required to load the parent roll.
Modify to two functions unwind stand which can produce one lane bottom gusset stand up pouch. (Patent No.M254422)
Equipped with web guiding system (line/edge) which assured the accuracy of sealing and trimming position.
The constant unwind tension is achieved by using tension auto controller (diameter calculating type) and magnetic powder brake.
Equipped with material running out alarm device to prevent the effect of material broke.

5.Both Side Printed Film Adjusting Device (Optional)

The adjustment is accurately controlled by servo motor incorporated with a contrast scanner. This device can eliminate the printing variations between upper and lower films automatically and reduce the defecting bags greatly.

6.Pulling Stand And Micro Location Offset Tension Control System

The movement of new dancing roller unit is controlled by two separate air pressure cylinders. According to the setting value, the system will detect and adjust the tension via change the feeding length of servo motor automatically. It is designed to provide the most stable tension during pouch making machine running.

7.Zipper And Side Sealing Section

The latest development of zipper pouch sealer and side sealer auto descending device which can prevent the material been overheated or broken when machine stop.
HCI zipper guiding and cooling plate (Patent No.178721): This plate can steady the sealing position of zipper and the cooling circulation system can prevent the zipper pouch been overheated.
Ultrasonic sealing device: it can weld the zipper rib in advance before entering the bottom sealer. The bottom sealed position will be flatted and perfected without leakage problem.

8.Bottom Sealing Section

Bottom sealer auto ascending device which can prevent the material been overheated or broken when machine stop. (Patent No.42360)
Each bottom sealing unit can replace embossing plate with silicon plate; the operator can change the sealing arrangement for actual demand.

9.Temperature Control System

Microprocessor PID temperature controllers work with SSR (solid state relay). The system can process once communication control in 2 seconds and provide the most accurate and fastest heating performance.
Temperature upper and lower limit alarm: the operator can alter the range of limit and auto stop function.
Temperature auto tuning device: the sealing temperature varying with machine speed and the increasing rate can be changed.(Standard on FTSC-V Pouch Making Machine)

10.Servo Cutter

Newest cutter unit with easy adjustment and durable structure. The cutter unit can adjust the position from single side or whole unit moves front and rear.
Cutter servo motor control system: The cutting speed is variable and the double cut function can eliminates burrs on in-line corner or notch puncher. This function improves the products quality.

11.Man-Machine Interface Control System of FTSC Pouch Making Machine

The automation man-machine system collocates with high-quality MES mechanical and electrical integrated controller. LCD colorful touch screen; Simple figure display for setting and easy operation.
Three main drives speed control modes:
Sealing time varies with cutting speed;
Cutting speed varies with sealing time;
Speed varies with heating extended time suitable for thicker film.
Various bags modes setting: standard pouch/ multi-seal with single cut / skip-seal / double cut.
Operation parameters could be saved in system such as cutting speed, pieces, length, temperatures etc...Parameters auto saving function when power failure happened.
Intuitional malfunction detects system: monitor items include motors, inventors, control box communications, punchers, sensors, sealing temperatures etc... and the abnormal position will display on LCD directly. It is very convenient for operators to obviate the malfunction immediately.

12.Safety Protection (Optional)

Our main concern is not only complying with the safety regulations but the conveniences of operation. For zipper and side sealing section using the movable protecting cover, for bottom sealing section using the safety light curtain, for cutter section using the interlock switch, etc...

13.Optional Accessories

Two functions unwind stand.
Both side printed film adjusting device.
Multiple punching devices.
Product conveyer.
Valve sealing device.
Air chiller.

Bags Making Machines

The FKSC Bag Making Machine is designed for sealable multi-layer materials or co-extrusion films such as laminates of Polyester, BOPP, and CPP...This machine is ideal for the production of center seal bag, side gusset bag, four side sealing bag, etc.

Specifications	FKSC-V500 Bag Making Machine
Material Width (mm)	200 - 1,250
Material Diameter (mm)(max.)	600
Bag Length (mm)(Max. 1,200mm skip-seal production)	30 - 400
Bag Width (mm)	75 - 500
Mechanical Speed (bags/min.)	10 - 150
Feeding Speed (m/min.) (max.)	35
Production Line	Center seal bag 1 Lanes
Production Line	Side gusset bag 1 Lanes
Production Line	Four side seal bag 1 lane

◇Feature:
1.Main Mechanism

Main drive servo motor: Providing the constant sealing time even cutting speed varied. This mechanism reduces the lost of material greatly.
Two feeding servo motor: The bag length is accurately controlled by servo motor upgrading production speed.
Outer transmission mechanism: Compared with inner transmission mechanism, the structure of brand-new outer transmission mechanism is much simple and eases to maintenance.
Two side gusseting methods: unwind gusseting device and middle gusseting unit using depends on the material characteristics.

2.Bag Making Machine Capability

One machine can produce various bags such as center seal bag, side gusset bag, four side seal bag...

3.Unwind Section

Horizontal unwind stand and 3" air shaft. Single operator is required to load the parent roll.
Unwind gusseting device: Only 3 pieces of mold plate are required to produce whole depth of gusseting.
Equipped with web guiding system (edge) which assured the accuracy of gusseting and sealing position.
The constant unwind tension is achieved by using tension auto controller (diameter calculating type) and magnetic powder brake.
Equipped with material running out alarm device to prevent the effect of material broke.

4.Pulling Stand And Micro Location Offset Tension Control System

The movement of new dancing roller unit is controlled by two separate air pressure cylinders. According to the setting value, the system will detect and adjust the tension via change the feeding length of servo motor automatically. It is designed to provide the most stable tension during bag making machine running.

5.Center Sealing Section

The latest development of center sealer auto descending device which can prevent the material been overheated or broken when machine stop.
Equipped with middle gusset forming unit, gusset heater and gusset cooler.

6.Bottom Sealing Section

Bottom sealer *3 and bottom cooler *1, each sealing position can be pressed twice with different temperatures. It improves the sealing quality and upgrades the production speed.
Bottom sealer auto ascending device which can prevent the material been overheated or broken when machine stopped. (Patent No.42360)
Each bottom sealing unit can replace embossing plate with silicon plate; the operator can change the sealing arrangement for actual demand.

7.Temperature Control System

Microprocessor PID temperature controllers work with SSR (solid state relay). The system can process once communication control in 2 seconds which provides the most accurate and fastest heating performance.
Temperature upper and lower limit alarm: the operator can alter the range of limit and auto stop function.

8.Cutter

Newest cutter unit with easy adjustment and durable structure. The cutter unit can adjust the position from single side or whole unit moves front and rear.
The machine employs a contrast scanner combined with a servo system for accurate positioning. It not only eliminates repetitive error on sealing position but also provides high cutting accuracy.

9.Man-Machine Interface Controller of FKSC-V Bag Making Machine

The automation man-machine system collocates with high-quality MES mechanical and electrical integrated controller. LCD colorful touch screen; Simple figure display for setting.
Operation parameters could be saved in system such as cutting speed, pieces, length, temperatures etc...Parameters auto saving function when power failure happened.
Intuitional malfunction detects system: monitor items include motors, inventors, control box communications, punchers, sensors, sealing temperatures etc... and the abnormal position will display on LCD directly. It is very convenient for operators to obviate the malfunction immediately.

10.Optional Accessories

Pneumatic punching device.
Flat center sealing device.
Zigzag cutter.
Bottom "k" shape sealing mold.
Product conveyer.
Air chiller.

Sealing Bag Making Machine

FK-FSC Economical Type Center Seal Bag Making Machine is a specialized machine for producing center seal bag. Simplified design, easy to operate. This model is the most economical investment for center seal bag production.

Specifications	FK-FSC-350 Center Seal Bag Making Machine
Material Width [mm]	700
Material Diameter [mm] [max.]	450
Bag Length [mm]	50-400
Bag Width [mm]	30-350
Mechanical Speed [bags/min.]	30-130

◇Feature:

1.Main drive AC motor control system.

2.The feeding length is accurately controlled by servo motor incorporated with photocell sensor for greatly upgrading the production speed.
3.Horizontal unwind stand and 3"air shaft. Single operator is required to load the parent roll.
4.Equipped with 1 center sealing mold, 1 bottom sealing and 1 cooling mold.
5.Bottom sealer auto ascending device which can prevent the material been overheated or broken when machine stopped. (Patent No.42360)
6.Skip seal function: the bag's length can reach to 9 times of feeding.
7.Equipped with auto temperature controllers provide the most accurate and fastest heating performance.
8.Newest cutter with easy adjustment and durable structure.
9.Micro computer control system

Auto counting.
Accumulative recording.
Auto-stop function for photocell ineffective.

10.Optional accessories

Pneumatic puncher
Statics eliminator
Conveyer

Bags Making Machine

The FSC-503-1 Static Shielding Bag / Anti-Static Bag Making Machine is designed for producing Static Shielding Bag, Anti Static Bag which protects electronic devices from ESD and electrostatic fields.

Specifications	FSC-503-1 Static Shielding Bag Making Machine
Material Width [mm]	300-1000
Material Diameter [mm] [max.]	500
Bag Length [mm]	150-500
Bag Width [mm]	50-400 (FEEDING LENGTH)
Mechanical Speed [bags/min.]	30-130
Production Line	Multi-Lanes

◇Feature:

1.Main drive AC motor + inverter control.

2.The Static Shielding Bag length is accurately controlled by servo motor incorporated with photocell sensor for greatly upgrading the production speed.

3.Horizontal unwind stand with v board provides the most convenient material loading and folding operation.
4.Equipped with web guiding system (line/edge) which assured the accuracy of sealing and trimming position.
5.Feeding dancer- roller assures that the most stable web feeding even under high speed operation.
6.Bottom sealer auto ascending device which can prevent the material been overheated or broken when machine stop. (Patent No.42360)
7.Equipped with microprocessor PID temperature controllers provide the most accurate and fastest heating performance.
8.Sealing time delay control provides excellence sealing quality for thick anti static film. Superior static shielding bag performance is thus assured.
9.Equipped with one set of water cooling device.
10.Micro computer control system.
11.Optional accessories

Trimming device
Pneumatic puncher
conveyer

Bags Making Machine

The Medical Bag Making Machine is designed for producing Medical Pouch, Medical Roll used in the medical and pharmaceutical industries.

Specifications	FSC-503-2 Medical Bag Making Machine
Material Width [mm]	300-500
Material Diameter [mm] [max.]	500 (Twin Unwinders)
Bag Length [mm]	50-400
Bag Width [mm]	150-500
Mechanical Speed [bags/min.]	30-130

◇Feature:
1. Main drive AC motor + inverter control.
2.The medical pouch length is accurately controlled by servo motor incorporated with photocell sensor for greatly upgrading the production speed.
3.Twin shafts unwind stand suits for two layers of different materials and multi-line production which upgrades efficiency greatly.
4.Two sets of dancer-roller unit provide the stable feeding tension both upper and lower web.
5.Sealing mold auto ascending device which can prevent the material been overheated or broken when machine stop. (Patent No.42360)
6.Equipped with microprocessor PID temperature controllers provide the most accurate and fastest heating performance.
7. Equipped with two sets of shear knives for bag partition.
8.Micro computer control system.
9.Optional accessories

Web guiding system (Edge).
Gusset bag making device.
Water cooling device.
Medical Roll winding device. (Twin shafts)

Bag Making Machinery

This machine is well suited for producing thick and multi-laminate film such as poly bags with center sealing and side gusseting.
When combined in operation with FSC-303 Three Step Bottom Sealing and Cutting Machine, it provides the same function as an in-line model Center Seal and Gusset Bag Making Machine.

Specifications	FK-N400 Center Seal and Gusset Machine
Unwind Width [mm]	110-820
Unwind Diameter [mm] [max.]	450
Bag Width [mm]	50-400
Rewind Inner Diameter	300mm Five-claw coreless
Rewind Diameter [mm]	700

◇Feature:
1.All of the swing axle driving system components is specially designed for a longer service life and easy maintenance.
2.Three AC motors control system: main drive, feeding and pulling, upgrading the production speed.
3.Horizontal unwind stand and 3" air shaft.
4.Unwind side gusset device:

Mold plate is unnecessary for producing gusset bag when the bag's width over 110mm.

5.Adopts two different side gusseting methods:

Unwind gusseting device and middle gusseting unit using depends on the material characteristics.

6.Equipped with 1 set of center sealing embossing unit, 1 set of gusseting heater and gusseting cooler.
7.Auto temperature controllers provide the most accurate and fastest heating performance.
8.Equipped with rewinding buffer roller unit assures that the most stable winding tension even speed varied.
9.Replaceable rewind shaft is suited for five-claw coreless or 3" paper core.
10.Optional accessories

Web guiding system. (Edge)
Flat center sealing device.
Two side sealing device.

Side Sealing Machine

For the side sealing operation of various poly bag's materials and composite films.
Used in conjunction with the FSC-303 Three Step Bottom Sealing and Cutting Machine, this machine produces the same three side seal bag as those produced by the FTSC-V Three Side Seal Bag Making Machine.

Specifications	FT-N500-2 Two Side Seal Machine
Unwind Width [mm]	300-1000
Unwind Diameter [mm] [max.]	450
Bag Width [mm]	100-500
Rewind Inner Diameter	300mm Five-claw coreless
Rewind Diameter [mm]	700 (Twin winding shafts)
Feeding Speed [m/min.] [max.]	0-30
Production Line	2

◇Feature:

Vertical type unwind stand with 3" metal shaft makes the loading easier.
Equipped with Web folding and center partition device.
Unwind pneumatic buffer roller unit for auto feeding speed controls which assures the most stable web feeding even under high speed operation.
Equipped with web guiding system (line/edge) which assured the accuracy of sealing and trimming position.
Equipped with 2 sets of side sealing embossing unit and sealing cooler.
Japan made auto temperature controllers provide the fastest heating performance.
Equipped with Independent trimming winding device. (FDS Series)
Two sets of rewinding dancing roller units for auto speed varied.
Twin rewinding shafts allow two-line productions.

Dry Laminating Machine

The FLM Dry Laminating Machine is specially designed for roll laminating operations of flexible packaging materials such as BOPP, CPP, PET, PE, Nylon, Aluminum Foil, and a variety of multi-layer films as well as performing surface treatment.

Specifications	FLM-1300 Dry Laminating Machine
Mechanical Speed (m/min)	0-150
Primary & Secondary Unwind Stands	Shafted & Motorized Turret Rotation Type
Unwind Core Inner Diameter (mm)	76 / 3"
Unwind Web Width (mm)	500-1,300
Maximum Unwind Diameter (mm)	600
Coating method	Gravure Mesh Rotary Type
Drying System	Electric Heating / Thermal Oil / Gas Heating
Laminating Roller	Thermal Oil Circulating Type
Rewind Stand	Shafted & Motorized Turret Rotation Type
Rewind Core Inner Diameter (mm)	76 / 3"
Maximum Rewind Diameter (mm)	800

◇Feature：
1.This dry laminating machine is designed for great production efficiency at a lower investment level. The machine is very easy to operate and can be easily used by those with printing machine operation skills.
2.The synchronized motion of the film laminating and gluing devices is of a non-shaft design which fully eliminates accumulated tolerance and facilitates the movement of both semi- and fully-completed products.
3.Primary Unwinding Section

Lift-up & floating type unwind stand with 3" air shaft providing the most convenient operation.
Auto roll exchanging is achieved by motorized turret rotation mechanism. And the material splicing device increasing the work efficiency.
Adopted edge guider system ensures the coating position accurately.
The unwind tension is sensed by load cell and compared to the set value. The control system will increases or decreases it according to the calculated differences automatically.

4.Coating Section

Gravure coating roller incorporated with reciprocating doctor blade assures extremely uniform coating thickness and surface smoothness.
Equipped with coating pressurized rubber roller & glue tank with pneumatic ascend / descend device.
Coating section also equipped with LCD touch screen. It is convenient for machine pre-run settings such as glue adjustment; hot melt temperature setting, doctor blade movement and gravure coating roller cleaning.

5.Drying Section

Four zones and straight dryer provide superior drying performance when dry laminating machine running.
3 different options of drying: Electric heating & Thermal oil & Gas heating.
Tension problems during the drying process are eliminated by use of the micro location offset via dancing roller control systems, which allow for foil (6 micron) to laminate with other various films. It provides the most stable tension even the material has passed through the dryer and been affected by the temperature.
Equipped with auto temperature controllers and waste gas exhausted disposal system.

6.Laminating Section

Equipped with hot oil circulating roller and water cooling roller ensure the laminating quality.

7.Rewind Section

Laminated roll auto exchanging is achieved by motorized turret rotation mechanism.
Equipped with auto web cutting device for continuous production.
The rewind tension is sensed by load cell too.
Equipped with Statics eliminator.

8.Man-Machine Interface Control of FLM Dry Laminating Machine

10.4" LCD colorful touch screen and simple figure display for setting.
Unwind & drying & rewind tension auto control.
Meter reached auto stop function.
Unwind auto stop and material exhausted stop function.
Parameters memory function.

9.Optional Accessories

Solvent auto circulating conveyance system.
Center guiding type web guider for secondary unwind stand.
Hotmelt coating device.
Corona treatment device.

Laminating Machine

Wet Laminating Machine Suitable for laminating all types of paper, film, and aluminum foil, such as, cigarette box wrapping, lunch and cake boxes, and etc..

Specifications	FLM- 1000 Wet Laminating Machine
Mechanical Speed (m/min)	0-150
Primary & Secondary Unwind Stands	Shafted Type
Unwind Core Inner Diameter (mm)	76 / 3"
Unwind Web Width (mm)	500 - 1,000
Maximum Unwind Diameter (mm)	1,150 (Primary) / 600 (Secondary)
Coating method	Rubber Roller Adhesive Coater
Drying System	Electric Heating / Thermal Oil / Gas Heating
Laminating	Steel Roller + Pressurized Rubber Roller
Rewind Stand	Shafted & Surface Winding Type
Rewind Core Inner Diameter (mm)	76 / 3"
Maximum Rewind Diameter (mm)	1,000

◇Feature:
1.Unwinding Section

Lift-up & fixed type unwind stand with 3" air shaft.
The unwind tension is sensed by load cell and compared to the set tension. The control system will increases or decreases tension according to the calculated the tension difference automatically.

2.Coating Section

Steel coating roller incorporated with pressurized rubber roller assures extremely uniform coating thickness and surface smoothness.
Glue tank with pneumatic ascend/ descend device.

3.Laminating Section

Equipped with pneumatic laminating pressure roller ensure the laminating quality.
The motor speed and tension are synchronized in motion which improves laminating quality and stability.

4.Drying Section

Four zones and straight dryer provide superior drying performance.
3 different options of drying: Electric heating & Thermal oil & Gas heating.
Tension problems during the drying process are eliminated by use of the micro location offset via dancing roller control systems, which allow for foil (6 micron) to laminate with other various films. It provides the most stable tension even the material has passed through the dryer and been affected by the temperature.
Equipped with auto temperature controllers and waste gas exhausted disposal system.
All rollers are driven by chain preventing from material scraped.

5.Rewind Section

Rewind is driven by motor providing the most accurate control.

6.Man-Machine Interface Control of FLM-Wet Laminating Machine

LCD colorful touch screen and simple figure display for setting.
Unwind & drying & rewind tension auto control.
Meter reached auto stop function.
Unwind auto stop and material exhausted stop function.
Parameters memory function.

7.Optional Accessories

Center guiding type web guider.
1 color printing device including waste gas disposal system.

Sealing Machine

The most economical investment for producing center glue sealing of PVC shrink labels.
Simplified design, easy to operate and maintain.

Specifications	FK-250(PVC Shrink Sleeve)	FK-350(PVC Shrink Sleeve)
Material Width [mm]	60 - 520	120 - 720
Material Dia. [mm] [max.]	450	450
Unwind Inner Dia. [mm]	76 / 3"	76 / 3"
Tube Width [mm]	25 - 250	50 - 350
Rewind Dia. [mm] [max.]	700	700
Rewind Core Inner Dia. [mm]	300mm Five-claw coreless	300mm Five-claw coreless
Mechanical Speed [m/min.]	0-100 (200 Optional)	0-100 (200 Optional)

◇Feature:
1.Unwinding Section

Swing out & floating type unwind stand with 3" air shaft. Single operator is required to manipulate and load the parent roll.
Equipped with magnetic powder brake for unwind tension control.
Main drive AC motor provides variable speeds to accommodate a variety of materials.

2.Glue Sealing Section

Equipped with glue feeding adj. magnet valve and flow quantity regulator.
The accurate width is achieved by using the shrink label forming plate.
Equipped with blower for drying the solvent faster also increasing the production speed.

3. Rewinding Section

Rewind TQ motor provides the stable winding tension.
Cantilevered five-claw coreless winder provides the fastest roll changeover.

4.Optional Accessories

Mechanical speed up to 200 m/min
Web guiding system. (Edge)
Glue Sealing flow quantity auto control device.
Vertical continuous perforation device.
3"HCI quick lock winding shaft.
Rewind oscillation device.

Seaming Machine

Designed for the center seaming operation of shrink sleeves such as PVC, PS, PET, and POF...

Specifications	FP-250 Shrink Sleeve Seaming Machine
Material Width (mm)	110 - 520
Material Diameter (mm)(max.)	500
Unwind Core Inner Diameter (mm)	76 / 3"
Tube Width (mm)	50 - 250
Rewind Diameter (mm) (max.)	700
Rewind Core Inner Diameter (mm)	76 / 3"
Mechanical Speed (m/min.)	0-200

◇Feature:
1.Unwinding Section

Built with heavy-duty frame to ensure Shrink Sleeve Seaming Machine operation.
Main drive AC motor + inverter.
Cantilevered unwind 3" air shaft for fast roll changeover.
Web guiding system provides the accuracy shrink sleeve seaming position.
Equipped with magnetic powder brake for unwind tension control.

2.Shrink Sleeve Seaming Section

Sleeve width adjusting device: forming plate unnecessary when shrink sleeve width over 50mm, bring down the production cost.
Solvent flow adjusting system: the flow of solvent is automatically match up with the machine speed varies.
Equipped with blower for drying the solvent faster also increasing the production speed.

3.Rewinding Section

Cantilevered rewind 3" air shaft for fast roll changeover.
Equipped with tension load cell assure extremely stable rewinding tension without the need to adjust it when speed and diameter varied.
Equipped with statics eliminator.

4.Micro Computer Control System

Adopted with industrial micro computer providing the accurate and stable control.
Colorful LCD touch screen
Unwind tension auto control function.
Rewind tension auto increase function.
Rewind length setting function.

5.Optional Accessories

Shrink sleeve forming plate for under 50mm (Size on request)
Hot melt coating device.
Stroboscope with photo sensor.

Vertical continuous perforation device.
Twin line vertical continuous perforation device.
Taping device.
Rewind oscillation device

Shrink Sleeve

HIGH SPEED / REVERSIBLE / MULTI-PURPOSES
The FSP-250-2 is an ideal re-reeling machine for round roll material inspecting process such as printing, surface or the seaming quality of shrink sleeves. 2 motors driven system and memorized reverse function allowed the winding direction changed during operation.
INNOVATIONS
Sleeves Seaming Quality Checking Device
Which can fill the sleeve with air and examine the middle seaming of sleeve continuously. Incorporated with a detecting sensor, the machine will stop and reverse automatically if there is a leakage of shrink sleeve.
On-Line Web Width Measuring System
Adopted with a high resolution CCD Camera for measuring the width of various films, reels and shrink sleeves such as PVC, PET, OPS, SBC. The qualified width can be set and the system will display the width variation all the time. The accuracy can reach to 0.1mm; all the defect position will be memorized. The operator can handle the defects after whole checking process finished.

Specifications	FS-250-2 Inspection and Rewinding Machine
Web Width (mm)	50 - 250
Inner Diameter (mm)	76 / 3" or on request
Winding Diameter (mm)(max.)	700
Mechanical Speed (m/min.)	0 - 250

◇Feature:

1.The roll diameter can reach to 700mm and 2 cantilevered expanding shafts for fast loading.

2.Equipped with web guiding system creates an extremely neat edge.

3.The winding direction can be changed in any time with forward / reverse jogging functions.
4.The winding tension is sensed by load cell and the control system will maintain the stable tension output during whole operation.
5.Equipped with observed board and fluorescent lamps for visual checking.
6.Sleeves Seaming Quality Checking Device.
7. 2 web flowcharts for printing or seaming defects inspecting.
8.Man-Machine Dialogue Control System:Touch screen, Auto tension control, Parameters memory, Length memorized & reverse function.
9.Optional Accessories

Stroboscope with mark sensor.
Vertical continuous perforation device
Rewind oscillation device
Sleeves seaming quality checking device
On-line web width measuring system

Shrink Sleeves machine

Efficient operation for inspect the shrink label center gluing quality.
Shrink Label printing and surface inspection.
The FSP Sleeve Rewinding Machine provides outstanding performance. It is indispensable procedure prior to automatic shrink label inserting machine.

Specifications	FSP-250 Sleeve Rewinding Machine
Tube Width [mm]	50 - 250
Unwind Inner Dia. [mm]	300mm Five-claw coreless (Or 3"6" 8" 10" on request)
Rewind Diameter [mm] [max.]	600
Rewind Core Inner Dia. [mm]	76 / 3" (Or 6" 8" 10" on request)
Mechanical Speed [m/min.]	0 - 200

◇Feature:
1.Unwinding Section

Cantilevered unwind five-claw coreless shaft for fast roll changeover.
Equipped with magnetic powder brake for unwind tension control.
Main drive DC motor provides variable speeds to accommodate a variety of materials.

2.Doctoring Section

Equipped with observed board for visual checking.
Install an optional stroboscope light to check printing quality is available through instant vision conservation.

3.Re-reeling Section

The rewinding is controlled by DC motor and Auto tension controller ensures the stable winding tension.
Web guiding system creates an extremely neat edge.
Auto counter for winding length.
Statics eliminator.

4.Optional Accessories

Unwind air shaft 3"
Stroboscope with photo sensor.
Vertical continuous perforation device.
Rewind oscillation device.

Cutting Machine

1.This cutting machine is suited for perforating and cutting operations for various shrink labels (shrink sleeves). It provides flexible cutting profiles of the product.

2.Also for electronics, computer and optical materials, film roll and foil roll cutting operations.

3.Series Models: FSC-201, 301, 501 Pvc Cutting Machine

Specifications	FSC-201PVC Sleeve Cutting Machine
Tube Width [mm]	30-200
Material Diameter [mm] [max.]	700
Unwind Inner Diameter [mm]	76 / 3" or 300mm Five-claw coreless
Cutting Length [mm]	10-400
Mechanical Speed [pcs/min.]	30-350
Feeding Speed [m/min.] [max.]	35

◇Feature:

1.Unwinding Section

Replaceable unwind shaft is suited for five-claw coreless and 3" paper core.
The AC motor driven unwind dancing roller unit for auto speed varied and assures that the most stable web feeding even under high speed cutting machine operation.

2.Perforating Section

Equipped with perforating device which can easily adjust the pressure and position.

3.Cutting Section

The cutting length is accurately controlled by servo motor incorporated with a German made photocell sensor for greatly upgrading the production speed.
Equipped with static electricity removing device.
Employs the product conveyor.

4.Micro Computer Control System

Auto counting function.
Accumulative recording function.
Auto-stop function for photocell ineffective.

5.Optional Accessories

Independent unwind stand.
Vertical continuous perforation device.
Skip cutting function.(Max. 1200 mm)
Rewinding device.

Sheeting Machine

Suitable for all types of plastic, paper, electronics, computer and optical materials, film roll and foil roll, sheeting operation.
Sheeting Machine Models: FCC-600,800,1000

Specifications	FCC-600 Servo Sheeting Machine
Unwind Diameter [mm] [max.]	600
Unwind Inner Diameter [mm]	76 / 3" (or on request)
Cutting Length [mm]	1-9999
Cutting Width [mm]	100-600
Feeding Speed [m/min.] [max.]	30

◇Feature:

1.Main drive

High accuracy of positioning and cutting ensured by numerically controlled servomotor.

2.Unwinding Section

Lift-up type unwind stand with 3" air shaft. Single operator is required to manipulate and load the parent roll.
Equipped with magnetic powder brake for tension control.
The AC motor driven dancing roller unit for auto speed varied and assures that the most stable web feeding even under high speed sheeting machine operation.

3.Sheeting Section

The cutting length is accurately controlled by servomotor for greatly upgrading the production speed.
High quality steel knives ensure clean cutting and a long service life.
Equipped with static eliminator.
Products collecting board.

4.Micro Computer Control System

Computerized control reduces errors to a minimum.
Auto counting function.
Accumulative recording function.
Auto-stop function for photocell ineffective.

5.Optional Accessories

Secondary unwind stand.
Slitting device.
Edge trimming device.
Printing photocell (Germany made).

Cutting Machine

The machine is ideal for the bottom sealing and cutting operation of poly bags.
For PVC shrink labels, paper and various plastic sheet cutting.

Specifications	FSC-301 (501) Sealing and Cutting Machine
Cutting Width [mm]	30-300 (30-500)
Material Diameter [mm] [max.]	700
Unwind Inner Diameter [mm]	76 / 3" or 300mm Five-claw coreless
Cutting Length [mm]	50-400
Mechanical Speed [bags/min.]	30-130
Feeding Speed [m/min.] [max.]	30 (28)

◇Feature:

1.Unwinding Section

Replaceable unwind shaft is suited for five-claw coreless and 3" paper core.
The AC motor driven unwind dancing roller unit for auto speed varied and assures that the most stable web feeding even under high speed operation.

2.Bottom Sealing Section

One-step bottom sealer designed, both upper and lower sealing embossing plates assures the sealing quality.
Bottom sealer auto ascending device which can prevent the material been overheated or broken when machine stop. (Patent No.42360)
Skip seal function: the bag's length can reach to 9 times of feeding.
Equipped with microprocessor PID temperature controllers which can provide the most accurate and fastest heating performance.

3.Cutting Section

The cutting length is accurately controlled by servo motor incorporated with photocell sensor for greatly upgrading the production speed.

4.Micro Computer Control System

Auto counting function.
Accumulative recording function.
Auto-stop function for photocell ineffective.

5.Optional Accessories

Center folding unwind stand.
Pneumatic puncher.
Date & code printer.
Zigzag cutter.
Rewind perforation device.
Rewinding device.
Products conveyer.

Sealing Cutting Machine

Suitable for the 3 steps sealing operation for one side sealing bag, gusset and center sealing bag, zig-zag cutting bag, hole punching bag and notch punching bag.

Specifications	FSC-303 (503) Three Step Sealing and Cutting Machine
Cutting Width (mm)	30 - 300 (50-500)
Material Diameter (mm) (max.)	700
Unwind Inner Diameter (mm)	76 / 3" or 300mm Five-claw coreless
Cutting Length (mm)	50 - 400
Mechanical Speed (bags/min.)	30 - 130
Feeding Speed (m/min.) (max.)	30 (28)

◇Feature:

1. Unwinding Section

Replaceable unwind shaft is suited for five-claw coreless and 3" paper core.
The AC motor driven unwind dancing roller unit for auto speed varied and assures that the most stable web feeding even under high speed operation.

2.Bottom Sealing Section

Three-step sealer design (1. upper and lower heating 2.upper heating 3. water cooling); producing an airtight seal. Especially for poly bags which thick and hard to seal.
Bottom sealer auto ascending device which can prevent the material been overheated or broken when machine stop. (Patent No.42360)
Skip seal function: the bag's length can reach to 9 times of feeding.
Equipped with microprocessor PID temperature controllers which can provide the most accurate and fastest heating performance.

3.Cutting Section

The cutting length is accurately controlled by servo motor incorporated with photocell sensor for greatly upgrading the production speed.

4.Micro Computer Control System

Auto counting function.
Accumulative recording function.
Auto-stop function for photocell ineffective.

5.Optional Accessories

Center folding unwind stand.
Pneumatic puncher.
Date & code printer.
Zigzag cutter.
Rewind perforation device.
Rewinding device.
Products conveyer.

Sheeting Machines

Designed to flatten and slice various kinds of plastic and paper. Maximum thickness of materials can reach 2mm.

Specifications	FSC-G1000 Rigid Film Flatten and Sheeting Machine
Unwind Diameter [mm] [max.]	600
Unwind Inner Diameter [mm]	76 / 3" (or on request)
Cutting Length [mm]	1-9999
Cutting Width [mm]	200-1000
Mechanical Speed [pcs/min.]	10-40

◇Feature:

1.Unwinding Section

Lift-up type unwind stand with 3" air shaft. Single operator is required to manipulate and load the parent roll.
Equipped with magnetic powder brake for tension control.
The AC motor driven dancing roller unit for auto speed varied and assures that the most stable web feeding.

2.Flatten Section

Employs an automatic thermo-controlled heated oil circulation system; flatten films can be neatly flattened and smoothed.
The heating roll employs a hot kerosene circulation for energy and cost saving performance.

3.Sheeting Section

Numerically controlled stepping motor provides very accurate positioning and cutting, and reduces errors to a minimum.
The cutter is hydraulically controlled without further adjustment for cutting thick and thin materials.
Special alloy blade provides clean and long lasting cutting performance.
The cutter is specially guarded for maximum operator safety.
Equipped with static eliminator.
Products collecting board.

4.Control Section

Touch screen setting for cutting length, speed and related parameters.
Auto counting function.
Accumulative recording function.
Auto-stop function for photocell ineffective.

5.Optional Accessories

Twin shafts unwinder.
Hydraulic ascent / descent unwinder.
Web guiding system. (Line & edge)
Slitting device.
Edge trimming device.
Printing photocell (Sick Germany).

Paper Embossing Machine

Designed for surface embossing on beer labels, aluminum foil for tobacco packaging, various beverage labels, book cover, envelops, invitation cards, congratulatory cards, packaging paper boxes. The Foil /Paper Embossing Machine will upgrade outlook effect and product quality level.
Applicable packaging materials include paper laminate, metalized paper, aluminum foil / paper, composite film etc. The surface Embossing Machine not only provides attractive beauty, but also greatly increases visual effect.
Series Models: FEM-800, 1200, 1600 Aluminum Foil / Paper Embossing Machine

Specifications	FEM-1200 Aluminum Foil / Paper Embossing Machine
Unwind Diameter (mm) (max.)	1,000
Material Width (mm)	600 - 1,200
Paper Core Inner Diameter (mm)	76 / 3"
Rewinding Type	Center rewinding with single shaft
Mechanical Speed (m/min.)	0 - 150

◇Feature:

1.Unwinding Section

Lift-up type unwind stand incorporate with 3" air shaft makes the loading easier.
The unwind tension is sensed by load cell sensor and compared to set tension. The auto controller will increase or decrease tension according to the calculated differences automatically.
Equipped with pneumatic brake for unwind tension control.
Equipped with curve roller device and adjustable aluminum roller to facilitate material's parallel without wrinkling.

2.Embossing Section

The embossing system is hydraulically operated.
Micrometric adjustment allows for accurate adjustment of embossing gap to achieve consistent grain depth.
The aluminum embossing roller is hard chrome plated. The lower pressure roller is nylon pressurized steel roller, providing long service life and stable embossing machine motion, clear and excellent grain.

3.Rewinding Section

Single air shaft surface rewinding features consistent tension and maximum smoothness of roll. No product damage and high production efficiency.
Equipped with meter counter for machine auto stop when setting length reached.

4.Optional Accessories

Shaftless & hydraulic ascent/ descent unwind stand.
Web guiding system. (Edge)
Unwind tension auto controller.

Paper Core Cutting Machine

FPT-500 Core Cutting Machine / Core Cutter

For paper core cutting operation, cutting length over 50mm to 1300mm.
Simplified design, easy to operate and maintain.
Movable
cutter structure, the adjustment of cutting length is ease and fast.
FPT-1300 Core Cutting Machine / Core Cutter (For Narrow Width)

Specifications	FPT-500 (1300) Core Cutting Machine / Core cutter
Paper Core inner Dia. [mm]	76 / 3" (Or on request)
Paper Core Length [mm]	1300 [max.]
Paper Core thickness [mm]	8 [max.]
Cutting Length [mm]	20-450 (5-1000)

Paper Core Cutting Machines

FPT-1300 Core Cutting Machine / Core Cutter (For Narrow Width)

For paper core cutting operation, cutting length under 50mm or 50-1300mm.
Simplified design, unskilled operator can be familiarized with the machine in a short time.
Fixed cutter structure is suitable for the mass production especially for same cutting length.

Specifications	FPT-500 (1300) Core Cutting Machine / Core cutter
Paper Core inner Dia. [mm]	76 / 3" (Or on request)
Paper Core Length [mm]	1300 [max.]
Paper Core thickness [mm]	8 [max.]
Cutting Length [mm]	20-450 (5-1000)

Winding Machine

Product ID: FDS

Designed to wind and collect the edge trim during bag making processes.
Especially suitable for rewinding high tensile strength material.
Allows for simultaneous operation at both ends.
The Trim Winding Machine is driven by a torque motor, providing synchronous motion with the main machine.

Specifications	FDS-450-2 Trim Winding Machine
Winding Shaft	Single
Paper Core inner Diameter [mm]	76 / 3"
Winding Diameter [mm]	350 [max.]
Paper Core Length [mm]	450 [max.]
Mechanical Speed [m/min.]	0-100

Winding Machine

Product ID: FDS

Designed to wind and collect the edge trim during bag making processes.
Especially suitable for rewinding high tensile strength material.
Allows for simultaneous operation at both ends.
The Trim Winding Machine is driven by a torque motor, providing synchronous motion with the main machine.

Specifications	FDS-450 Trim Winding Machine
Winding Shaft	Single
Paper Core inner Diameter [mm]	76 / 3"
Winding Diameter [mm]	350 [max.]
Paper Core Length [mm]	450 [max.]
Mechanical Speed [m/min.]	0-100

Trim Winder

Designed to wind and collect the edge trim during slitting machine processes.

Specifications	FDS-V500 Trim Winder
Paper Core inner Diameter [mm]	76 / 3"
Winding Diameter [mm]	300 [max.]
Paper Core Length [mm]	500 [max.]
Mechanical Speed [m/min.]	0-300

◇Feature:
1.The Trim Winder is driven by a vector motor and inverter, providing synchronous motion with the slitting machine.
2.Equipped 3" winding air shaft for easy unloading.
3.The left and right movement of trimming guider is using the Germany made slide screw, it is more efficient and safety than using the liner guider.
4.Equipped with pneumatic dancing roller unit, the winding tension could be adjusted.
5.Rewinding speed auto control function.

Sealing Machine

Suitable for sealing an additional spout on various multi-layer bags.

Specifications	L1 Spout Inserting & Sealing Machine
Bag Width [mm]	100-240
Spout Width [mm]	30-40
Spout Length [mm]	24-30
Spout Position	45 angle on the corner or on bag open top

◇Feature:
1.Equipped with bag corner cutter, the primary operation before spout inserted.
2.Spout auto inserting device makes the positioning ease and fast.
3.PID temperature controllers provide the most accurate and fastest heating performance.
4.Spout sealing mould is controlled by pneumatic, the sealing pressure is adjustable.
5.Constant sealing time controller ensures each spout sealing quality without leakage.
6.Food switch control units ease to operate and increase the work efficiency.

Friction Ring

For differential shaft use- HCI quick lock ring can handle various torqueses between differential shaft and friction ring providing uniform rewinding tension for each reel. Rewinding speed difference caused by material thickness variation can be compensated by the sliding motion that ensures consistent tension at all times.

Specifications	3" Side Pressure Type Differential Shaft
Ring Width [mm]	40 / 22
Clamping Range [mm]	75-77

◇Feature:
1.HCI self-developed Differential Shaft & Friction Ring, PATENT NO. 186461
2.Designed for convenient replacement of paper core without scratching. Offers the same convenience as an air shaft.
3.Suitable for fitting on a new or used slitting and rewinding machine without affecting the original machine's structure and operation.
4.Ball Type Friction Ring is available on HCI Slitting Machine as optional.

Differential Shaft

Specifications	3" Side Pressure Type Differential Shaft
Ring Width [mm]	40
Clamping Range [mm]	75-77